ThermaHive V2 Complete Kit, International 230V

$749.99
Order Now
Built to order: ships 4 to 6 weeks after your deposit

Built to order for 220 to 240 V countries. Pay a non-refundable deposit of 50% of the product price, plus shipping in full, when you order. Expected lead time is 4 to 6 weeks, then we email you a link to pay the balance before it ships.

8-frame or 10-frame? Pick the size of your Langstroth brood box: count its frames, or measure its outside width (about 35 cm for 8-frame, 41 cm for 10-frame).

In the box: ThermaHive Controller, Bottom Treatment Frame, 230V Heater Insert, Blank Insert, 2 wireless sensors with hex saddle mounts, diffuser board, 8GB micro SD card and a mains cord with the plug for your country.

Import VAT or GST and any duties, where they apply, are collected by the carrier on delivery. Questions? Email support@thermahive.net.

Number of Frames

ThermaHive V2 · International 230 V

A complete redesign, smarter, slimmer, and built to scale across your entire apiary without moving a single brood box. No chemicals. No waiting periods. No restrictions.

2026 field season: 84% reduction from season peak. See the results.
🛡️ Lifetime Warranty
💰 One-Time Purchase
💳 Interest-Free Payment Plans
Solar Ready
Wireless Updates
Multi-Hive
Chemical-Free
BroodMinder Compatible
Year-Round Hive Companion
230–240 V
220 to 240 V Mains, 220 V Heater
Up to 50
Wireless Sensors
125°F / 52°C
Firmware Ceiling
Treatments run at 108–112°F (42–44°C)
IP65
Weatherproof Rating
2 × 120 mm
Variable-Speed Fans
Left and right, one per half
Pre-Order
Built to Order
4 to 6 week lead time

Interactive

See how it fits your hive

ThermaHive goes above and below the boxes you already own. Your frames, boxes and bees stay exactly where they are. Open the interactive diagram to see every part up close, inside and out.

Open the setup explorer →

ThermaHive V2 installed on a Langstroth hive: the Top Box with the Controller above a medium and a deep, and the Bottom Box Frame with the Heater Insert below.

Kit Pricing

The Complete Kit

Complete Kit
Everything Included
50% deposit today
of the product price, plus shipping in full
Non-refundable. Balance due when your unit is ready to ship

Includes two SHT31-DIS Wireless Sensors, enough to monitor two hives right out of the box.

220 to 240 V countries

How international orders work

1. Deposit
Pay a non-refundable deposit of 50% of the product price, plus shipping in full, when you place your pre-order.
2. Build
We build your 230 V unit to order. Expected lead time is 4 to 6 weeks.
3. Balance
When it is ready to ship, we email you a link to pay the remaining 50% of the product price, then it ships.

Prices are shown in your local currency where available. Import VAT or GST and any duties, where they apply, are collected by the carrier on delivery and are not included in our price.

2026 Field Season

Proven on real hives

84%
Mite reduction from season peak across 6 of 6 research colonies
20 of 20
Treated colonies came through the season, across four apiaries
250 lbs
Honey harvested from seven heat-treated hives

Independent testers in North Carolina, New Jersey and Georgia ran their own units on their own hives. See the full 2026 results or watch Frederick Dunn’s review from NAHBE 2026.

Complete Kit

Everything You Need, Right Out of the Box

✓
ThermaHive Controller
✓
Bottom Treatment Frame
✓
Heater Insert with Magnetic Lock
✓
Blank Insert
✓
2x SHT31-DIS Wireless Sensors
✓
2x Hex Saddle Frame Mounts
✓
Diffuser Board
✓
8GB Micro SD Card
✓
Mains Cord with Your Country’s Plug

Fits standard 8 or 10-frame Langstroth hives. The plug on the mains cord matches your shipping country.

What’s New in V2

Built for the Modern Beekeeper

Every feature in V2 was redesigned based on beekeeper feedback: less lifting, less wiring, more hives treated with less effort.

◈
Wireless Temperature & Humidity Sensor

The SHT31-DIS wireless sensor drops right between your frames, no drilling, no modifications to your woodware. The slim body fits the standard 6–9mm bee space and transmits readings every 2 seconds. Connect up to 50 sensors to a single controller for full apiary coverage. The included Hex Saddle frame mount suspends the sensor between frames at the correct depth through inspections. Runs on a standard CR2032 coin cell battery that lasts around 248 days.

One sensor is designated the anchor. It sits at bee space inside the brood nest and holds the treatment setpoint, so the controller regulates to the temperature where the bees and mites actually are, not the air at the edge of the box. The rest monitor and log.

The sensors are also sold on their own and work with BroodMinder products, with every V2 unit, and with existing V1 units after a firmware update. No ThermaHive system required.

🔥
Modular Magnetic Heater System
The Heater Insert connects to the Bottom Treatment Frame via a magnetic locking system, with no tools required for installation or removal. One heater moves between multiple hives equipped with Bottom Treatment Frames, keeping per-hive costs down as your operation grows. When the heater isn’t in use, swap in the Blank Insert to convert the frame into a standard screened bottom board for everyday colony management.
☀
Solar Compatibility
Power ThermaHive V2 from the sun. V2 is designed to work with a compatible solar battery, keeping your hive monitor running off-grid, which suits remote apiaries where running power isn’t practical. We publish a full build guide for a setup under $300 in parts: a 100 Ah LiFePO4 battery, a 1000 W inverter and a small panel with an MPPT controller, good for roughly one and a half treatments per charge. See the DIY solar battery build guide. Solar battery sold separately.
☁
Ventilation Mode
Beyond heat treatment, the controller supports a dedicated Ventilation Mode that circulates air through the hive without running a full treatment cycle. Useful for airflow management during hot weather or colony recovery periods between treatments.
⇧
Over-the-Air Firmware Updates
Firmware updates are delivered over the controller’s built-in Wi-Fi access point at startup, so there are no USB cables and no disassembly required. Units in the field stay current with the latest treatment protocols and improvements.
⇩
Live Monitoring and Full Session Logs
The in-hive wireless sensors report every 2 seconds throughout a session, so you can follow a treatment live through the BroodMinder app rather than standing over the hive. Every session is also written in full to the onboard micro SD card: temperature, humidity, phase, mode, settings and any safety events, all timestamped and opening straight into Excel or Google Sheets.
🛡
Four Independent Layers of Overheat Protection
Firmware holds a hard temperature ceiling and cuts the heater the moment a reading crosses it. Invalid or missing sensor data blocks operation rather than defaulting to heat. The heater assembly carries its own factory overheat protection independent of the controller, a 100°C cutout and a 112°C thermal fuse installed by the manufacturer. And a hardware watchdog resets the controller if the processor ever stalls, opening the heater relay as the first action on restart. Every failure mode ends with the heater off.
🌬
Two 120 mm Variable-Speed Fans
One fan on the left and one on the right, each centered on its half of the hive. A diffuser board spreads warm air across the full footprint instead of letting it rise in a column, and fan output scales with the gap to setpoint so the system can push through the colony’s own fanning response on the way up without overshooting once it arrives. Even distribution is the hard engineering problem in thermal treatment, and it is most of what we spent 2026 solving.
⚡
Built for 230 to 240 V Mains
Built for 220 to 240 V mains: a 220 V PTC heater rated for 230 to 240 V supplies, with a mains cord fitted with the plug for your country. We will publish measured power figures for the 230 V build once our own testing is complete.
⊕
Effortless Multi-Hive Scaling
Equip every hive in your apiary with a Bottom Treatment Frame, then move the single Heater Insert hive to hive as needed. No permanent per-hive cost beyond the frame itself. Scale your operation without scaling your equipment budget.
BroodMinder
BroodMinder Compatible
ThermaHive V2 is fully compatible with the BroodMinder monitoring ecosystem. Integrate with your existing BroodMinder hub and the BroodMinder app for remote hive monitoring alongside treatment tracking, one unified view of colony health and treatment history.
🍯
Harvest On Your Own Schedule
Because no chemicals ever enter the hive, there’s no honey-super removal requirement or harvest waiting period to plan around. Treat when your hive needs it and harvest when it’s ready, improving your chances of multiple honey pulls in a season.
💰
One-Time Investment, Not a Recurring Cost
ThermaHive is a one-time hardware purchase. Unlike chemical treatments that require repeat purchases multiple times a year, the only added cost is an optional extra unit, like an additional Bottom Treatment Frame, if you’re treating more than one hive.

{
“@context”: “https://schema.org/”,
“@type”: “Product”,
“name”: “ThermaHive V2 Complete Kit, International 230 V”,
“image”: [
“https://thermahive.net/wp-content/uploads/2026/06/V2-Complete-2-e1783618583684.jpg”
],
“description”: “Chemical-free Varroa mite treatment using precision, sensor-controlled heat. Works alongside an existing IPM plan or standalone. Year-round hive climate support, BroodMinder compatible, wireless data logging, modular multi-hive scaling. Complete kit includes bottom frame, heater insert, diffuser board, two wireless sensors, power cord, and SD card.”,
“brand”: {
“@type”: “Brand”,
“name”: “ThermaHive”
},
“mpn”: “TH-V2-2026-230V”,
“sku”: “THV2-KIT-230V”,
“url”: “https://thermahive.net/product/v2-international/”,
“offers”: {
“@type”: “Offer”,
“url”: “https://thermahive.net/product/v2-international/”,
“priceCurrency”: “USD”,
“price”: “749.99”,
“priceValidUntil”: “2027-12-31”,
“availability”: “https://schema.org/PreOrder”,
“eligibleRegion”: [“GB”, “AU”],
“itemCondition”: “https://schema.org/NewCondition”,
“seller”: {
“@type”: “Organization”,
“name”: “ThermaHive, LLC”
}
}
}

Weight 25 lbs
Dimensions 24 × 18 × 18 in
Number of Frames

10-Frame, 8-Frame

Sensor Options

Wireless Sensor (SHT31-DIS)

Heater Type

220V PTC ceramic element (self-regulating), for 230 to 240V mains

Display

128×64 OLED, sunlight-readable

Power Input

220 to 240V AC mains, with the plug for your shipping country

Fan System

Dual PWM-controlled 120mm ventilation fans

Temperature Range

Up to 125°F (52°C) adjustable

Enclosure

Weather-resistant, rain and sun proof (IP65 equivalent)

Sensor Refresh Rate

2-Seconds

Wireless Sensor Battery

CR2032 Battery (Comes Pre-Installed), lasts around 248 days

Safety

Single Relay + a 100°C cutout and a 112°C thermal fuse installed by the manufacturer

Wireless Sensor Capacity

Up to 50 Paired Wireless Sensors

Data Logging

8GB Removable Micro SD Card

Connectivity

BroodMinder Hub and App, Wireless Data Download, OTA Firmware Updates

There are no reviews yet.

Be the first to review “ThermaHive V2 Complete Kit, International 230V”

Your email address will not be published. Required fields are marked *